Controle d’un DE1 par un EasyE4 et SmartWire

0001 QA05 := 16384; // Set value
0002
0003 Q18 := TRUE;   // Stop with C-Stop (output bit 01)
0004 Q19 := TRUE;   // Stop with Q-Stop (output bit 02)
0005 Q21 := TRUE;   // Enable ramp generator (output bit 04)
0006 Q22 := TRUE;   // Unfreeze ramp (output bit 05)
0007 Q23 := TRUE;   // Enable setpoint (output bit 06)
0008 Q27 := TRUE;   // Control by PLC (output bit 10)
0009
0010 IF M01 THEN
0011
0012     Q17 := TRUE; // On-Off (output bit 00)
0013
0014     T01 (
0015         EN := Q17,
0016         I1 := T#20ms,
0017         Q1 => Q20, // Enable operation (output bit 03)
0018     );
0019
0020 ELSE
0021
0022     Q17 := FALSE; // On-Off (output bit 00)
0023     Q20 := FALSE; // Enable operation (output bit 03)
0024
0025 END_IF;
0026
0027
0028 (*
0029     1st step :
0030         bit 04 := TRUE (Enable ramp generator)
0031         bit 05 := TRUE (Unfreeze ramp)
0032         bit 06 := TRUE (Enable setpoint)
0033         bit 10 := TRUE (Control by PLC)
0034
0035     2nd step :
0036         bit 01 := TRUE (Stop with C-Stop)
0037         bit 02 := TRUE (Stop with Q-Stop)
0038
0039     3rd step :
0040         bit 00 := TRUE (On-Off)
0041
0042     4rd step :
0043         bit 03 := TRUE (Enable operation)
0044 *)

Voir exemple : SmartWireDE1easySoft